Siemens Cerberus Pro
Model: FC721-ZZ - The FC721-ZZ is a compact fire control panel with integrated operating unit that can process signals from Cerberus PRO devices of up to 126 addresses.
 |
• The FC721-ZZ is a compact fire control panel with integrated operating unit that can process signals from Cerberus PRO devices of up to 126 addresses. The fire control panel may be used as a stand-alone unit only. • In addition, an Ethernet connection is available at each station. Via this fast Ethernet interface remote control service is possible. All detector lines are monitored for ground faults. • The Cerberus-Engineering-Tool permits the system to be adapted to specific customers' requirements. Up to 2000 events can be stored according to various criteria. Automatic summer/winter change. Detection and automatic read-in (auto-configuration) of all C-NET devices, providing immediate simple operation. Stored data can be uploaded via Cerberus-Remote access. • The FC721-ZZ is ideally suited for smaller applications, e.g. in workshops, hotels, etc. The expansion and accessories must be ordered separately. Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 126 • Number of detector lines: 1 loop or 2 stub lines • Programmable input/output: 4 • Relay outputs: 1x RT alarm 1x RT fault • Supervised output: 1 x RT alarm 1 x RT fault 1 x Horn • Mains voltage: 85... 265 VAC • Operating voltage: 21... 28.6 VDC • Operating current: max. 2.5 A • Power supply: 70 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 7 Ah • Plug-in position: 1 -> for serial interface RS232 or RS485 • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 398 x 80 mm |
Model: FC721-YZ - The FC721-ZZ is a compact fire control panel with integrated operating unit that can process signals from Cerberus PRO devices of up to 126 addresses.
 |
• The FC721-ZZ is a compact fire control panel with integrated operating unit that can process signals from Cerberus PRO devices of up to 126 addresses.The fire control panel may be used as a stand-alone unit only. • In addition, an Ethernet connection is available at each station. Via this fast Ethernet interface remote control service is possible. All detector lines are monitored for ground faults. • The Cerberus-Engineering-Tool permits the system to be adapted to specific customers' requirements. Up to 2000 events can be stored according to various criteria. Automatic summer/winter change. Detection and automatic read-in (auto-configuration) of all C-NET devices, providing immediate simple operation. Stored data can be uploaded via Cerberus-Remote access. • The FC721-ZZ is ideally suited for smaller applications, e.g. in workshops, hotels, etc. The expansion and accessories must be ordered separately. Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 126 • Number of detector lines: 1 loop or 2 stub lines • Programmable input/output: 4 • Relay outputs: 1x RT alarm 1x RT fault • Supervised output: 1 x RT alarm 1 x RT fault 1 x Horn • Mains voltage: 85... 265 VAC • Operating voltage: 21... 28.6 VDC • Operating current: max. 2.5 A • Power supply: 70 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 7 Ah • Plug-in position: 1 -> for serial interface RS232 or RS485 • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 398 x 80 mm |
Model: FC722-ZZ - The FC722-ZZ (2-loop, expandable to 4) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 252 addresses.
 |
• The FC722-ZZ (2-loop, expandable to 4) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 252 addresses. The fire control panel can be used as a stand-alone version or networked. It can be programmed with a user-friendly Cerberus-Engineering-Tool to create a system with great versatility. Up to 32 fire control panels and fire terminals can be connected in a single cluster (C-WEB/SAFEDLINK network), or up to 16 panels when the cluster is connected to a danger management system. Using a fiber-optic backbone (C-WEB/LAN) up to 14 of these clusters with up to 16 panels each can be networked. This topology enables the construction of an EN 54-conform network with up to 64 fire control panels and fire terminals. • All detector lines are monitored for ground faults. • Adaptation of the user text directly on the terminal or with the Cerberus-Engineering-Tool. Up to 2000 events can be stored according to various criteria. Automatic summer/winter time change. • Detection and automatic read-in (auto configuration) of all C-NET devices, providing immediate simple operation. • Stored data can be uploaded via Cerberus-Remote access. • The FC722-ZZ is ideally suited for medium-sized applications, e.g. in workshops, hotels, etc. or when networked as part of much larger applications. The FC722-ZZ with flexible cross-linking possibilities can also be used for extensive systems. • The expansion and accessories must be ordered separately. Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 252 • Number of detector lines: 2 (4) loops or 4 (8) stub lines • Programmable input/output: 8 • Supervised output: 1 x RT alarm 1 x RT fault 1 x horn • Mains voltage: 85... 265 VAC • Operating voltage: 21... 28.6 VDC • Operating current: max. 2.5 A • Power supply: 70 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 7...12 Ah • Plug-in position: 2 -> for serial interfaces RS232, RS485 , 2 -> for network modules , 1 -> for loop extension (C-NET) • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 398 x 160 mm (without cover cap) 430 x 398 x 188 mm (with cover cap) |
Model: FC 722-YZ - The FC722-YZ (2-loop, expandable to 4) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 252 addresses.
 |
• The FC722-YZ (2-loop, expandable to 4) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 252 addresses. The fire control panel can be used as a stand-alone version or networked. It can be programmed with a user-friendly Cerberus-Engineering-Tool to create a system with great versatility. Up to 32 fire control panels and fire terminals can be connected in a single cluster (C-WEB/SAFEDLINK network), or up to 16 panels when the cluster is connected to a danger management system. Using a fiber-optic backbone (C-WEB/LAN) up to 14 of these clusters with up to 16 panels each can be networked. This topology enables the construction of an EN 54-conform network with up to 64 fire control panels and fire terminals. In addition� an Ethernet connection is available at each station. • All detector lines are monitored for ground faults. • Adaptation of the user text directly on the terminal or with the Cerberus-Engineering-Tool. Up to 2000 events can be stored according to various criteria. Automatic summer/winter time change. • Detection and automatic read-in (auto configuration) of all C-NET devices, providing immediate simple operation. • Stored data can be uploaded via Cerberus-Remote access. • The FC722-YZ is ideally suited for medium-sized applications, e.g. in workshops, hotels, etc. or when networked as part of much larger applications. The FC722-YZ with flexible cross-linking possibilities can also be used for extensive systems. • With 24 indicator groups, each with one red and one yellow LED. • The expansion and accessories must be ordered separately. Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 252 • Number of detector lines: 2 (4) loops or 4 (8) stub lines • Programmable input/output: 8 • Supervised output: 1 x RT alarm 1 x RT fault 1 x horn • Mains voltage: 85... 265 VAC • Operating voltage: 21... 28.6 VDC • Operating current: max. 2.5 A • Power supply: 70 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 7...12 Ah • Plug-in position: 2 -> for serial interfaces RS232, RS485 , 2 -> for network modules , 1 -> for loop extension (C-NET) • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 398 x 160 mm (without cover cap) 430 x 398 x 188 mm (with cover cap) |
Model: FC722-ZA - The FC722-ZA (2-loop, expandable to 4) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 252 addresses.
 |
• The FC722-ZA (2-loop, expandable to 4) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 252 addresses. The fire control panel can be used as a stand-alone version or networked. It can be programmed with a user-friendly Cerberus-Engineering-Tool to create a system with great versatility. Up to 32 fire control panels and fire terminals can be connected in a single cluster (C-WEB/SAFEDLINK network), or up to 16 panels when the cluster is connected to a danger management system. Using a fiber-optic backbone (C-WEB/LAN) up to 14 of these clusters with up to 16 panels each can be networked. This topology enables the construction of an EN 54-conform network with up to 64 fire control panels and fire terminals. • All detector lines are monitored for ground faults. • Adaptation of the user text directly on the terminal or with the Cerberus-Engineering-Tool. Up to 2000 events can be stored according to various criteria. Automatic summer/winter time change. • Detection and automatic read-in (auto configuration) of all C-NET devices, providing immediate simple operation. • Stored data can be uploaded via Cerberus-Remote access. • The FC722-ZA is ideally suited for medium-sized applications, e.g. in workshops, hotels, etc. or when networked as part of much larger applications. The FC722-ZA with flexible cross-linking possibilities can also be used for extensive systems. • The expansion and accessories must be ordered separately Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 252 • Number of detector lines: 2 (4) loops or 4 (8) stub line • Programmable input/output: 8 • Supervised output: 1 x RT alarm 1 x RT fault 1 x horn • Mains voltage: 230 VAC • Operating voltage: 21... 28.4 VDC • Operating current: max. 5 A • Power supply: 150 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 26 Ah • Plug-in position: 2 -> for serial interfaces RS232, RS485 , 2 -> for network modules , 1 -> for loop extension (C-NET) • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 796 x 160 mm (without cover cap) 430 x 796 x 188 mm (with cover cap) |
Model: FC722-ZE - The FC722-ZE (2-loop, expandable to 4) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 252 addresses.
 |
• The FC722-ZE (2-loop, expandable to 4) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 252 addresses. The fire control panel can be used as a stand-alone version or networked. It can be programmed with a user-friendly Cerberus-Engineering-Tool to create a system with great versatility. Up to 32 fire control panels and fire terminals can be connected in a single cluster (C-WEB/SAFEDLINK network), or up to 16 panels when the cluster is connected to a danger management system. Using a fiber-optic backbone (C-WEB/LAN) up to 14 of these clusters with up to 16 panels each can be networked. This topology enables the construction of an EN 54-conform network with up to 64 fire control panels and fire terminals. • All detector lines are monitored for ground faults. • Adaptation of the user text directly on the terminal or with the Cerberus-Engineering-Tool. Up to 2000 events can be stored according to various criteria. Automatic summer/winter time change. • Detection and automatic read-in (auto configuration) of all C-NET devices, providing immediate simple operation. • Stored data can be uploaded via Cerberus-Remote access. • The FC722-ZE is ideally suited for medium-sized applications, e.g. in workshops, hotels, etc. or when networked as part of much larger applications. The FC722-ZE with flexible cross-linking possibilities can also be used for extensive systems. • With 48 indicators groups, each with one red and one yellow LED. • The expansion and accessories must be ordered separately. Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 252 • Number of detector lines: 2 (4) loops or 4 (8) stub line • Programmable input/output: 8 • Supervised output: 1 x RT alarm 1 x RT fault 1 x horn • Mains voltage: 230 VAC • Operating voltage: 21... 28.4 VDC • Operating current: max. 5 A • Power supply: 150 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 26 Ah • Plug-in position: 2 -> for serial interfaces RS232, RS485 , 2 -> for network modules , 1 -> for loop extension (C-NET) • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 796 x 160 mm (without cover cap) 430 x 796 x 188 mm (with cover cap) |
Model: FC724-ZA - The FC724-ZA (4-loop, expandable to 8) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 504 addresses.
 |
• The FC724-ZA (4-loop, expandable to 8) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 504 addresses. The fire control panel can be used as a stand-alone version or networked. The control panel can be programmed with a user-friendly Cerberus-Engineering-Tool to create a system with great versatility. Up to 32 fire control panels and fire terminals can be connected in a single cluster (C-WEB/SAFEDLINK network), or up to 16 panels when the cluster is connected to a danger management system. Using a fiber-optic backbone (C-WEB/LAN) up to 14 of these clusters with up to 16 panels each can be networked. This topology enables the construction of an EN 54-conform network with up to 64 fire control panels and fire terminals. • All detector lines are monitored for ground faults. • Adaptation of the user text directly on the terminal or with the Cerberus-Engineering-Tool. Up to 2000 events can be stored according to various criteria. Automatic summer/winter time change. • Detection and automatic read-in (auto configuration) of all C-NET devices, providing immediate simple operation. • Stored data can be uploaded via Cerberus-Remote access. • The FC724-ZA is ideally suited for large-sized applications, e.g. in industrial plants, regional banks, office complexes, etc. The FC724-ZA with flexible cross linking possibilities can also be used for extensive systems. • The expansion and accessories must be ordered separately. Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 504 • Number of detector lines: 4 (8) loops or 8 (16) stub lines • Programmable input/output: 12 • Supervised output: 1x RT alarm 1x RT fault 2x Horn • Mains voltage: 230 VAC • Operating voltage: 21... 28.6 VDC • Operating current: max. 5 A • Power supply: 150 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 26 Ah • Plug-in position: 2 -> for serial interfaces RS232, RS485 , 2 -> for network modules , 2 -> for loop extension (C-NET) • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 796 x 160 mm (without cover cap) 430 x 796 x 188 mm (with cover cap) |
Model: FC724-ZE - The FC724-ZE (4-loop, expandable to 8) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 504 addresses.
 |
• The FC724-ZE (4-loop, expandable to 8) is a compact fire control panel with an integrated operating unit that can process signals from Cerberus PRO devices of up to 504 addresses. The fire control panel can be used as a stand-alone version or networked. The control panel can be programmed with a user-friendly Cerberus-Engineering-Tool to create a system with great versatility. Up to 32 fire control panels and fire terminals can be connected in a single cluster (C-WEB/SAFEDLINK network), or up to 16 panels when the cluster is connected to a danger management system. Using a fiber-optic backbone (C-WEB/LAN) up to 14 of these clusters with up to 16 panels each can be networked. This topology enables the construction of an EN 54-conform network with up to 64 fire control panels and fire terminals. • All detector lines are monitored for ground faults. • Adaptation of the user text directly on the terminal or with the Cerberus-Engineering-Tool. Up to 2000 events can be stored according to various criteria. Automatic summer/winter time change. • Detection and automatic read-in (auto configuration) of all C-NET devices, providing immediate simple operation. • Stored data can be uploaded via Cerberus-Remote access. • The FC724-ZE is ideally suited for large-sized applications, e.g. in industrial plants, regional banks, office complexes, etc. The FC724-ZE with flexible cross linking possibilities can also be used for extensive systems. • The expansion and accessories must be ordered separately. Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 504 • Number of detector lines: 4 (8) loops or 8 (16) stub lines • Programmable input/output: 12 • Supervised output: 1x RT alarm 1x RT fault 2x Horn • Mains voltage: 230 VAC • Operating voltage: 21... 28.6 VDC • Operating current: max. 5 A • Power supply: 150 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 26 Ah • Plug-in position: 2 -> for serial interfaces RS232, RS485 , 2 -> for network modules , 2 -> for loop extension (C-NET) • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 796 x 160 mm (without cover cap) 430 x 796 x 188 mm (with cover cap) |
Model: FC726-ZA - The FC726-ZA (4-loop, expandable to 28 loops) is a modular fire control panel with an integrated operating unit that the fire control panel can be used as a stand-alone version or networked.
 |
• The FC726-ZA (4-loop, expandable to 28 loops) is a modular fire control panel with an integrated operating unit tha The fire control panel can be used as a stand-alone version or networked. The control panel can be programmed with a user-friendly Cerberus-Engineering-Tool to create a system with great versatility. • Up to 32 fire control panels and fire terminals can be connected in a single cluster (C-WEB/SAFEDLINK network), or up to 16 panels when the cluster is connected to a danger management system. Using a fiber-optic backbone (C-WEB/LAN) up to 14 of these clusters with up to 16 panels each can be networked. This topology enables the construction of an EN 54-conform network with up to 64 fire control panels and fire terminals. • All detector lines are monitored for ground faults. • Adaptation of the user text directly on the terminal or with the software engineering tool. Up to 2000 events can be stored according to various criteria. Automatic summer/winter time change. • Detection and automatic read-in (auto configuration) of all C-NET devices� providing immediate simple operation. • Stored data can be uploaded via Cerberus-Remote access. • The FC726 is ideally suited for veryt can process signals from Cerberus PRO devices of up to 1512 addresses. A card cage in the basic fire control panel equipment is used for installation of additional line cards (C-NET) or I/O cards. A mix of up to 5 cards max. is possible. Line and I/O cards can be exchanged without removing power from control panel. • For the large and complex buildings, eg. Office buildings, university campuses, etc. The FC726-ZA with flexible cross linking possibilities can also be used for extensive systems. The expansion and accessories must be ordered separately. Date Tehnice• Detector compatibility: Cerberus PRO FD720 • Number of addresses: max. 1512 • Number of detector lines: Loop with loop extension -> 4 loops or 8 stub lines C-NET -> max. 20 (4 per line card) • Programmable input/output: max. 60 (12 per card) • Supervised output: 1 x RT alarm; 1 x RT fault 2 x Horn • Mains voltage: AC 230 V • Operating voltage: 21... 28.6 VDC • Operating current: max. 5 A • Power supply: 150 W • Emergency power supply: up to 72 h (optional) • Battery capacity: 2 x 12 V, 45 Ah • Plug-in position: 2 -> for serial interfaces RS232, RS4852, 2 -> for network modules, 1 -> for loop extension (C-NET), 5 -> for line or I/O cards (card cage) • Operating temperature: -8... +42 °C • Storage temperature: -20... +60 °C • Relative humidity: 95% (no condensation) • Protection category: IP30 • Color housing/cover: grey, RAL 7035/grey, RAL-Design 050 00 00 • Cabinet dimensions (W x H x D): 430 x 796 x 260 mm (without cover cap) 430 x 796 x 288 mm (with cover cap) |
